Best Sulfer Burners On The Market!
Lower pH. Breakdown Bicarbonates. Improve Water Penetration. Organic/OMRI approved. Keep Water Lines and Emitters Clean. Reduce Water Usage.
Best Sulfer Burners On The Market!
Lower pH. Breakdown Bicarbonates. Improve Water Penetration. Organic/OMRI approved. Keep Water Lines and Emitters Clean. Reduce Water Usage.
The Benefits
- Most plants require a specific pH in order to grow properly.
- Treating untreated water with a sulfur burner drops the pH instantly
- Lowering the pH with acid will reduce the bicarbonates.
Benefits Of Breaking Down Bicarbonates:
- Bicarbonates (HCO3) bond with calcium and other elements in the water and soil. This bond ties up beneficial elements so they are no longer available to the plants.
- Using acid to neutralize the bicarbonates in the water, helps free up the minerals and nutrients in the water.
- Bicarbonates tie up the nutrients in the water and are not allowing them to be utilized when the irrigation water hits the soil. This is why you see a lot of times the water sitting on top of the soil and not going deeper to the roots.
Water Made Right
The Water Made Right team works with growers, agronomists, and universities to develop practical low-cost solutions to resolve high pH irrigation water problems. These solutions result in healthier plants and higher crop
Sulfur burners have been used effectively by growers since the 1920s. Sweetwater burners represent the latest and most efficient units available providing the maximum benefit for the amount of sulfur consumed.
Purposes of the technology:
Through the Sweetwater Solution™ (more commonly known as the Sweetwater sulfur burner), the sulfur burner generates sulfurous acid in order to provide the most efficient, simple, safe, and affordable solution to a series of water and soil conditions.
Testimonials
Last year we got 3 bales of cotton on 136 acres using 2-3 gpm per acre. On an adjacent 34 acre plot which didn’t have the Sweetwater sulfur burner, we used 5-6 gpm per acre and yielded only 2 bales an acre. In particular, I like to use the burner for pre-irrigation to aid seed germination and spoon feed sulfur to my cotton during early growth. I would recommend the Sweetwater sulfur burner to anyone growing cotton.”
The irrigation water that comes from the Columbia River in Washington State has high PH and bicarbonate levels. By using the Burners, I have successfully been able to bring those down to manageable thresholds.
Thanks to Tyson and the Sweetwater folks, OUR WATER IS WHERE WE NEED IT!!!
SW 250
- Capacity: Burn rate: 5 – 10 lbs. of Sulfur per hr
- Treats 100 – 200 GPM
SW 500
- Capacity: Burn rate: 7 – 13 lbs. of Sulfur per hr
- Treats 600 – 1400 GPM
- 2 inch inlet: 80 – 100 gallons per minute
- Minimum of 20 psi and maximum of 40 psi
- Dimensions 48 W x 34 D x 71 H
- Hopper capacity: 500 lbs. elemental prill sulfur
SW 1000
- Capacity:Burn rate: 10 – 20 lbs. of Sulfur per hr
- Treats 1200 – 3000 GPM
- 3 inch inlet: 150 – 200 gallons per minute
- Minimum of 30 psi and maximum of 45 psi
- Dimensions 60 W x 48 D x 71 H
- Hopper capacity: 1,700 lbs. elemental prill sulfur
SW 2000
- Capacity:Burn rate: 40 – 55 lbs. of Sulfur per hr
- Treats 3000 – 6000 GPM
- 3 inch inlet: 150 – 200 gallons per minute
- Minimum of 30 psi and maximum of 45 psi
- Dimensions 60 W x 48 D x 76 H
- Hopper capacity: 2,500 lbs. elemental prill sulfur